Series 100 Drives

Extron’s Series 100 DC Adjustable Speed Drive is designed to provide economical, reliable regulation and stability for permanent magnet or shunt would D.C. motors from 1/8 to 3 HP. They achieve an accuracy of +/- 2% over the entire speed range and perform well at reduced speed where other adjustable speed drives are often less efficient. Small in size these rugged controllers are suitable for a wide variety of industrial applications. Select models have U.L. listing and C.S.A. certification, which makes them perfect for the OEM application requiring a dependable, cost saving motor control. For simple regulation of DC motor speed, no other economical control is a easy to install or maintain. Max./min. speed, I.R. comp., and current limit adjustments are accessible by screwdriver from the front cover. Hookup is quick, with clearly marked terminal connections. All electronic circuitry is contained on one PC board.

Features

1/8 to 3 HP
Open construction
Adjustable Min, Max speed, IR comp, Current limit
Pilot relay for remote start/stop
Fully rated armature bridge

Line compensation
Terminal strip connections
Transient protected
2% regulation
UL, UR, CSA

Performance Specifications

Input Power	1/8 -1 HP, 115 VAC single phase, 50 / 60 Hz ½ - 3 HP, 230 VAC single phase, 50 / 60 Hz
Output Power	1/8 - 1 HP, 90 VDC armature, 100 / 50 VDC field ½ - 3 HP, 180 VDC armature, 200 / 100 VDC field
Speed Range	30:1
Speed Regulation	2% of motor base speed with 95% load change
Standard Adjustments	Minimum speed, maximum speed, current, IR compensation
Speed Pot	2 watt, 5000 ohms (optional)
Reference Voltage	6.2 vdc

Model Selection

Model	HP	Description	Input	Output (VDC) ARM	CSA Certified	UL Listed	Output (VDC) FLD
100-10	1/8 - 3/4	Basic Chassis	115 VAC	90	YES	YES	100/50
100-15	1	Basic Chassis	115 VAC	90	YES	NO	100/50
100-20	½ - 1 ½	Basic Chassis	230 VAC	180	YES	YES	200/100
100-30	2	Basic Chassis	230 VAC	180	YES	YES	200/100
100-40	3	Basic Chassis	230 VAC	180	YES	YES	200/100